top of page

Universal Coatings

Safety Data Sheets available on request

Wooden Cars

All products are available in the following sizes:

1 Quart (.95 L)

1 Gallon (3.78 L)

5 Gallon Pail (18.9 L)

55 Gallon Drum (207.9 L)

BluCure, LLC is a licensed distributor for Clean Armor products

Universal 200 Adhesion Promoter

A UV Curable Adhesion Promoter. For use as a bonding coat for metal and plastic to be applied wet on wet as an adhesion promoter with the sealer or primer. Is used for improved adhesion and anti-corrosion protection on steel, aluminum, and plastic. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is.

Universal 210 Primer - White or Clear

A UV Curable White or Clear Primer. Can be tinted. For use as a primer for metal and plastic. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion and is compatible with most waterborne and solvent base coats. Can be applied to previously finished and fully cured substrates. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is.

Available Finishes: White or Clear

Universal 214 Tintable Sealer

A UV Curable Tintable Sealer. For use as an intercoat sealer for basecoats and primers.Can be tinted with solvent based tints up to 2%. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion and is compatible with most pre-finished substrates. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is.

Universal 220 Sealer

A UV Curable Sealer. For use as a sealer for wood, metal, and plastic. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion and is compatible with most pre-finished substrates. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is.

Universal 230 Top Coat

A UV curable polymer top coat. For use as a top coat on interior and exterior wood, metal, and plastic surfaces. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion and is compatible with most waterborne and solvent base coats. Can be applied to previously finished and fully cured substrates. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is

Universal 235 Base Clear Coat

A UV curable polymer clear coat. For use as a clear coat on modern water based and solvent based color systems. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion. Can be applied to previously finished and fully cured substrates. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is.

Universal 290 Surface Prep

A surface preparation solvent that is engineered for Clean Armor UV curable resin and coating systems. Used to prepare tool and mold faces by removing contaminants/solvent residue and to remove Clean Armor mold release agents.

bottom of page